50 SKY SHADES - World aviation news

6th Aeronautical Materials and Manufacturing Technology Shanghai International Forum Was Successfully Held

Date: 19 Nov 2020 22:59
Author:

Currently, 109 Xinzhou series aircrafts and 39 ARJ21 have been delivered, and the orders for C919 aircraft have reached 815. China's civil aviation industry has stepped into a stage of rapid development, which is accompanied by the innovation and application of materials. Since the 13th Five-Year Plan, China has put a lot emphasized on composite materials. It is predicted that by 2023, China’s aviation composite material market will reach 28.27 billion yuan.


In this context, the 6th Aeronautical Materials and Manufacturing Technology Shanghai International Forum was successfully held in Shanghai from November 18th to 19th. The forum attracted more than 150 domestic and foreign companies, including governments, aviation materials institutions, universities, OEM, component suppliers, testing and certification, etc. Over 200 representatives attended the forum.


The forum was hosted by MINHANG DISTRICT ASSOCIATION FOR SCIENCE & ECHNOLOGY OF SHANGHAI, SHANGHAI SOCIETY OF AERONAUTICS, Civil Aircraft Materials Industry Development Alliance, COMAC Shanghai Aircraft Manufacturing Co., Ltd., BAOWU SPECIAL METALLURGY CO., LTD. , supported by Chinese Society of Aeronautics and Astronautics Commercial Aircraft Corporation of China, Ltd, co-organized by COMAC Shanghai Aircraft Design and Research Institute, AECC COMMERCIAL AIRCRAFT ENGINE CO., LTD., China Superalloy Innovation Strategic Alliance (CSISA), and organized by Galleon (Shanghai) Consulting Co., Ltd.

Image title

Since 2016, 3D printing has begun to develop steadily, and civil aviation additive manufacturing has begun a series of mergers, and has gradually moved towards a steady path of commercial mergers and airworthiness certification. The civil aviation additive manufacturing’s future development direction is low-cost, intelligent and integrated. In recent years, “there are still some key core technologies that are in urgent need of breakthroughs: including design, failure criteria and forward verification test analysis methods, powder recovery standards and identification of key parameters, and quality stability technologies, Process equipment equivalence verification technology and non-destructive testing technology, etc." YI Junlan, Deputy Director of Ecological Manufacturing Department / Senior R&D Engineer Aeronautical Manufacturing Technology Institute of COMAC Shanghai Aircraft Manufacturing Co., Ltd. said , "For future vision, the first is to face practice. We still have a certain gap in basic data with foreign countries. This data needs to be supplemented; the second is to face it positively, take a positive design path, and better utilize the advantages through the design of additive manufacturing."

The forum established a platform between civil aircraft manufacturers and suppliers. Regarding how to improve the utility of aviation materials, and promote the upgrading and innovation of aeronautical materials, various units have carried out information exchanges and constructive cooperation to actively promote the vigorous and healthy development of the civil aviation industry.




Loading comments for 6th Aeronautical Materials and Manufacturing Technology Shanghai International Forum Was Successfully Held...

Recommended

Dassault Falcon news at NBAA

Regarding Falcon 6X :"I’m happy to report development is right on schedule,” says Dassault chairman and CEO Éric Trappier“We finished the critical design review of the 6X this summer, which has trigge...

Operational at any time to protect your business jet

The Geneva Airpark team is actively engaged to remain in the service of business aviation at Geneva Airport, during the Covid-19 pandemic. For high-end monitoring of your business jet and its equipmen...

The 2nd International Symposium on Air Traffic Management for Civil Aviation Was Successfully Held

The 2nd International Symposium on Air Traffic Management for Civil Aviation was successfully held in Beijing from September 15th - 16th. The forum was hosted by Technical Committee of Avion...

Panasonic In-flight systems

Panasonic Avionics' software and applications bring together personalization, revenue generation, connectivity, and content in an open source technology environment that transform our in-flight entert...

Promoting the Future Development of Civil Aircraft Informatization in China

The 10th Annual China Aviation Industry International Forum - Shanghai, Tianmu Lake was successfully held in Liyang city from October 28th to 29th. Leading companies, experts...

11th Annual Civil Aircraft Industry International Forum 2021

【Commitee】【Hosted by】Chinese Society of Aeronautics and Astronautics【Organized by】AVIC SHENYANG AIRCRAFT INDUSTRIAL (GROUP) CO., LTD.【Co-organized by】Galleon (Shanghai) Consulting Co., Lt...

10th China Aviation Industry International Summit - Shanghai, Tianmu Lake

【Organizing Committee】Hosted byShanghai Society of AeronauticsCOMAC Shanghai Aircraft Design and Research InstituteCOMAC Shanghai Aircraft Manufacturing Co., Ltd.CHINA AERONAUTICAL RADIO ELECTRONICS...

3rd Civil Aircraft Operation Support Technology International Forum

会议背景:据统计,亚太航空公司在航材库存中的投入超出欧美航空公司的4至5倍,究其原因,主要归结于相对较高的备件保障要求、更多的内饰翻修与改装、低效的海关通关、匮乏的航材共享机制、距原厂更远的地理位置、占...

2021 (3rd) China Civil Aviation Connected Aircraft Conference

【Committee】【Hosted by】Shanghai Society of Aeronautics Civil Aircraft Operation Support Technology Sub-committee of CSAA     【Supported by】COMAC Shanghai Aircraft De...