50 SKY SHADES - World aviation news

Manufacturer news

Latest from aviation and aerospace manufacturers

Latest Manufacturer news

Advancements in favour of a sustainable aviation biofuel industry in France

As the French Government presented the country’s ambitions with regards to sustainable aviation fuel, in Toulouse, Airbus, Air France, Safran, Suez and Total acknowledge the launch of a new Call for Expression of Interest (CEI). The ambition presented set forth the conclusions of a working gro...

Cobham Titan will enable smaller aircraft to carry out Tactical Missions

The public safety aviation sector has seen a rise in the demand for smaller aircraft to carry out tactical missions, whilst maintaining the same levels of connectivity and capability. These emergency services communicate using up to nine separate radios, which presents challenges  of payload se...


Liebherr Technology on board of Boeing 777X Maiden Flight

Liebherr-Aerospace congratulates The Boeing Company on a successful first flight for the new 777X airplane! Dr. Klaus Schneider, Managing Director at Liebherr-Aerospace Lindenberg said: “We congratulate Boeing to this great historic milestone in civil aviation. This first flight is an impressive proof of our very good, open and trustful cooperation and we are looking forward to conti...

First Flight of New Boeing 777X successfully completed

First Flight of New Boeing 777X successfully completed,entering the next phase of its rigorous test program! The 777X took off in front of thousands at Paine Field in Everett, Washington, for a three hour, 51 minute flight over Washington state before landing at Seattle's Boeing Field. "The 777X flew beautifully, and today's testing was very productive," said Capt....

New main rotor configuration for Kopter SH09

Kopter pursues its flight test campaign in Sicily with its 3rd prototype (P3) having now reached more than 100 flights and being now equipped with a modified main rotor head and the next generation of main rotor blades. Both were successfully tested at the end of last year on the company’s whirltower in Ennetmoos, Switzerland. These have now been installed on P3 in Pozzallo where Kopter...

First PD-14 aircraft engine arrived to Irkutsk aviation plant for the installation on MC-21

In January PD-14 aircraft engines were delivered from UEC-Perm Engines to Irkutsk Aviation Plant (IAZ). They will be installed on Russian MC-21-300 airliner the flight tests of which will start in the mutually agreed by UAC and UEC timeframes. This reported by UEC Perm Engines press-service. For the first time PD-14 engines have covered the distance of almost 4 thousand kilometers by speci...

Successful First Flight of Bell Boeing CMV-22B Osprey

The first CMV-22B Osprey, built by Bell Textron and Boeing completed first flight operations at Bell’s Amarillo Assembly Center. The CMV-22B is the latest variant of the tiltrotor fleet, joining the MV-22 and CV-22 used by the U.S. Marine Corps and U.S. Air Force. The U.S. Navy will use the CMV-22B to replace the C-2A Greyhound for transporting personnel, mail, supplies and hi...

Airbus is adding A321 production capabilities in Toulouse

Following its strategy to keep its overall production system at the leading edge of technology and to increase industrial capacity and flexibility, Airbus has decided to create new A321 production capabilities at its site in Toulouse. By mid-2022 the current A380 Lagardère facility in Toulouse will accommodate a digitally-enabled A321 line as a step to modernise the A320 production syste...

Airbus customer-centric solutions at Heli-Expo 2020

Get ready to see civil range of Airbus Helicopters at Heli-Expo 2020! Centre-stage on booth 3432 will be an H125, an ACH130 Aston Martin Edition, and an H175. The H125 will be displayed with the company’s latest improvements destined to better serve aerial work operations. Following the success of Airbus Corporate Helicopters (ACH) since its launch in 2017 as the dedicated Private &...

RUAG Aerostructures and Airbus agree on long-term cooperation

RUAG Aerostructures and Airbus have concluded an agreement to strengthen their long-term partnership. Over the coming six years, RUAG will be manufacturing and supplying the rear center section as well as the flooring and side shells of the central fuselage section for the Airbus A320 Family. Dirk Prehn, EVP RUAG Aerostructures is delighted: “The renewal of this long-term partnersh...

Bombardier Learjet gets avionics upgrade

FAA has certified the latest update to the popular Garmin G5000 avionics suite aboard of Bombardier Learjet aircraft. The upgrade will be incorporated on new Learjet aircraft deliveries. In a few months’ time, the new Garmin G5000 avionics suite will also be a standard feature on Bombardier’s newest Learjet, the Learjet 75 Liberty, which is...

40 additional A321neo aircraft for CALC

China Aircraft Leasing Group Holdings Limited, a full value-chain aircraft solutions provider for global airlines, has reached an agreement with Airbus on its remaining backlog, and includes an additional order for 40 A321neo aircraft. It also includes a conversion of 15 of its existing A320neo backlog into A321neos. Together with a previous order for 11 A321neos, CALC’s total order for the...

Full slate of Gulfstream customer-centric support events 2020

Gulfstream Aerospace Customer Support organization will host a comprehensive schedule of customer-focused events in 2020, including its biennial Operators & Suppliers Conference, two Customer Advisory Board (CAB) meetings, several operators forums and a flight operations forum. “These events provide us with numerous opportunities, in groups or individually, for customer input a...

Liebherr Aerospace Brasil partners PTI Technologies

Liebherr Aerospace Brasil entered a new partnership with PTI Technologies and signed a contract to become the supplier of hydraulic manifolds for Embraer’s latest aircraft. Liebherr Aerospace Brasil welcomed several PTI senior leaders to its facility in Guaratingueta (Brazil) in the fall of 2019 for the celebration of the first strategic collaboration between the two companies...

Upcoming events

NBAA Business Aviation Convention & Exhibition 2026

20/10/2026 - 22/10/2026
United States, Las Vegas

Bahrain International Airshow 2026

18/11/2026 - 20/11/2026
Bahrain, Sakhir

Essential news

Jungheinrich & Deutsche Aircraft set a new standard in aerospace logistics with automated warehouse for next-generation regional aircraft production

In a landmark step towards next-generation regional aircraft manufacturing, Jungheinrich has delivered an advanced automated logistics centre to Deutsche Aircraft at Leipzig/Halle Airport. Supporting...

SkyDrive eyes Osaka’s rooftops for a new generation of eVTOL vertiports

Following the successful public flight demonstrations at Expo 2025 Osaka, SkyDrive announced plans to undertake a feasibility study exploring the conversion of Osaka City’s existi...

Airbus A350F freighter successfully performs its maiden flight

The Airbus A350F freighter (MSN 700), the first of two flight test aircraft, has successfully completed its maiden flight. Equipped with dedicated flight test instrumentation, the aircraft spent 4 hou...

German aviation reaches new milestone as Deutsche Aircraft opens D328eco® Final Assembly Line

A new era for German aerospace began today as Deutsche Aircraft officially opened its Final Assembly Line (FAL) at Leipzig/Halle Airport. Joined by senior government representatives Christian Hirte an...

RAF 2026 - RTU opens new pathways for European aerospace collaboration

Speaking during the Riga Aviation Forum 2026, Pauls Irbins, Head of the Aerospace Direction at the RTU Innovation Office, presented a compelling vision of how Riga Technical University (RTU) can becom...

Heart Aerospace unveils ES-36, announces JSX purchase agreement for up to 100 aircraft

Heart Aerospace has unveiled the ES-36, its new 36-seat hybrid-electric regional airliner and planned production aircraft. Concurrently, award-winning air carrier JSX announced a deposit-backed agreem...

iOS Apps development in Riga, Latvia

Top of the week

Liebherr showcases next-generation technologies shaping the future of business aviation at NBAA-BACE 2026

Underscoring its commitment to innovation in business aviation, Liebherr-Aerospace will present a range of advanced technologies and solutions at NBAA-BACE 2026, highlighting its readiness to support...

LATAM Airlines Brazil and Embraer celebrate a new chapter with the airline’s first E195-E2

LATAM Airlines Brazil and Embraer have marked a major milestone with the commencement of deliveries of the carrier’s first-ever E195-E2. Scheduled to enter commercial service in the coming days,...

Airbus Helicopters and Saskatchewan Indian Institute of Technologies partner to advance Indigenous aerospace training capabilities in Canada

Airbus Helicopters Canada has partnered with the Saskatchewan Indian Institute of Technologies (SIIT) to strengthen Indigenous participation in the aerospace sector through enhanced training and workf...

Aeroberm and Foster Aviation forge strategic partnership to accelerate vertiport infrastructure development in UAE

Foster Aviation, the Dubai-based provider of Advanced Air Mobility and aviation solutions, and Aeroberm, a Skyportz company and developer of the patented modular vertipad system, have announced a...

Jungheinrich & Deutsche Aircraft set a new standard in aerospace logistics with automated warehouse for next-generation regional aircraft production

In a landmark step towards next-generation regional aircraft manufacturing, Jungheinrich has delivered an advanced automated logistics centre to Deutsche Aircraft at Leipzig/Halle Airport. Supporting...

Tecnam unveils the FAR Part 23-certified P2008JC NG in the United States, redefining efficiency in next-generation pilot training

Tecnam introduces the P2008JC NG to the United States market, bringing flight schools a certified, next-generation training aircraft designed to dramatically reduce operating costs while maximizing fl...

FACC unlocks new growth opportunities through strategic funding

Rising production rates and the launch of new aircraft programs are driving increased demand for manufacturing capacity across the aerospace industry. To support this growth, FACC plans to i...