50 SKY SHADES - World aviation news

Airbus Helicopters to start large-scale printing of A350 components

Download: Printable PDF Date: 22 Sep 2018 10:28 category:
Publisher:
Airbus Helicopters to start large-scale printing of A350 components - Manufacturer publisher
Tatjana Obrazcova
Country: Germany

Airbus Helicopters has officially launched the production of latch shafts for the doors of A350 passenger aircraft using 3D manufacturing. The printed components are cheaper to produce and weigh less than their counterparts made using traditional means, thereby helping Airbus to offer ever more economical and environmentally friendly aircraft. Airbus Helicopters in Donauwörth is manufacturing doors for all Airbus aircraft programmes as a supplier. The redesign of the latch shafts and the new production process have resulted in Airbus’s first large-scale production using metallic 3D printing.

The latch shafts are made using an EOS M 400-4 printer and are composed of titanium powder. Four laser beams melt the powder and produce the desired components layer by layer. This method allows parts to be created from much less material, making them lighter, yet just as sturdy as the original component. Up to 28 latch shafts can be produced in just a single printing process.

Printed latch shafts are 45 percent lighter and 25 percent cheaper to produce than traditional ones. As each A350 has 16 latch shafts, producing these parts using 3D printing leads to a saving of just over four kilos per aircraft. Airbus Helicopters plans to deliver 2,200 components a year once production is fully operational. Qualification is scheduled to be completed at the end of 2018, with serial production starting in early 2019; the first A350 components – with serial number 420 – are set to take to the skies in 2020. Airbus Helicopters has already started preparations to produce an even larger group of A350 door components using 3D printing, and this method is also expected to be utilised to produce helicopter components.

Pic1 ISC Einzelteile 2018 09 05 002 Airbus Helicopters

“Our goal is to get developers making more use of 3D printing. This means that 3D printing should be taken into consideration right from the initial planning stages for new components, which may be able to be manufactured particularly easily and cost-effectively using this method,” said Luis Martin Diaz, Head of Industrial Service Centers, Airbus Helicopters Donauwörth). “Weight savings are especially important when it comes to helicopters. Airbus will start preparations for the industrialisation of 3D-printed helicopter components this year,” he added.

Nikolai Zaepernick, Senior Vice President Central Europe with EOS says: “We are proud that Airbus Helicopters relies on EOS-Technology for the manufacturing of flight critical components such as latch shafts. Our systems provide a very high and reproducible quality. With this machine performance and with our know-how we can significantly support Airbus Helicopters in the certification process for the component.” 

Pic2 Industrial Service Center 3D Printing 2018 08 30 154 Airbus Helicopters



Loading comments for Airbus Helicopters to start large-scale printing of A350 components...


Recommended

MC-21-300 with PD-14 engine gets ready for the first flight

On November 27  PJSC Irkut Corporation,where the newest Russian airliner MC-21-300 with PD-14 engine is being built, got important visit. The Minister of Industry and Trade of...

LMS-901 Baikal - an aircraft meant to replace An-2

The promising light multipurpose aircraft LMS-901 "Baikal", created to replace the Soviet aircraft An-2, was "blown" in the wind tunnel of the TsAGI im. Zhukovsky. The re...

New customer service centre - Rolls-Royce strenghthens Gulfstream on-site support

The latest Rolls-Royce customer support facility in Savannah is officially opened! The new 62,000 sqft (5,800 m²) Savannah Customer Service Centre is adjacent to the new Gulfs...

MTU Maintenance Zhuhai completes expansion and celebrates 3,000 shop visits

MTU Maintenance Zhuhai, a joint venture between MTU Aero Engines and China Southern Airlines Company Limited, has completed its facility expansion to increase existing capacity by 50 percent to 450 sh...