Maintenance / Trainings news - essential news in maintenance / trainings aviation

Latest Maintenance / Trainings news

Airways Aviation ESMA welcomes September students

J&C Aero welcomes its 700th aircraft for livery change

J&C Aero has completed its 700th aircraft branding project while producing and installing livery on two Bombardier CRJ200s operated by a Spanish regional airline Air Nostrum. Under the project, Air Nostrum’s livery was produced in-house by J&C Aero’s printing...

Applications for new, fully-paid scheme goes live - British Airways to fund training costs of 60 prospective pilots

PROSPECTIVE pilots can from today apply for a place on a new British Airways scheme that will see the £100,000 cost of their training covered entirely by the airline. The national flag carrier’s Speedbird Pilot Academy programme will lift the previously prohibitive cost barrier of t...

More from Maintenance / Trainings

New Praetor full-flight simulator in Europe & new location in U.S. - Embraer and FlightSafety

Embraer and FlightSafety International opened new Praetor full-flight simulator in Orlando, Florida. The simulator is already qualified by the FAA. Initial training for customers is available this month with the recurrent training scheduled to start in October. Both companies also announced the launch of the fourth Praetor simulator, which will be based in Europe, at a location to be announce...

Skyborne Airline Academy invests again in ALSIM AL42 simulator

Skyborne Airline Academy has placed their second acquisition of an ALSIM AL42 simulator. The simulator will be delivered to their facility in Gloucestershire, United Kingdom. The AL42 is an exact replica of the Diamond DA42, constructed using genuine aircraft components and equipped with the latest real-world Garmin G1000 avionics suite. It also features the latest-generation visual system, G...

Lufthansa Technik AERO Alzey expands production capacities

Lufthansa Technik AERO Alzey , has taken a substantial step towards expansion by inaugurating a new 1,500-square-meter hangar on September 15th. The new building, spanning three levels, is aimed at enhancing the company's production capabilities and accommodating the increasing demand for engine overhaul. The new facility, situated within LTAA's existing premises, will serve as a temp...

Textron Aviation creates room for growth - expands IFM, supporting demand for custom Cessna and Beechcraft aircraft interiors

Textron Aviation is adding 16,000 square feet to its Interior Manufacturing Facility to support growing demand for unique and custom Cessna and Beechcraft aircraft interiors. The expansion enables Textron Aviation to streamline production processes by centralizing machinery within the space to support efficient interior manufacturing for its entire lineup of Cessna Citation jets, as well as Beechc...

TARMAC Aerosave celebrates the 10th anniversary of its Teruel facility

TARMAC Aerosave, aircraft transition, storage, maintenance and recycling center specialized in storage, celebrates the 10th anniversary of its Spanish facility located in Teruel. On this occasion, the group inaugurates its 3rd Aragon hangar and confirms the facility growth goals. In 10 years, TARMAC Aerosave has welcomed at Teruel 450 aircraft and has permitted to more than 290 ones to get b...

Air France Industries KLM Engineering & Maintenance opens new engine shop at Orly

Launched in 2019, the Single Roof project has passed a key milestone with its official opening of AFI KLM E&M’ new engine shop at the Orly platform. The facility is the centerpiece of the Single Roof project, whose ambition is to confirm AFI KLM E&M at the forefront of industry standards in Engine Maintenance and to support its positioning on new-generation products such as...

ExecuJet MRO Services Australia prepares for entry into service of Falcon 6X

ExecuJet MRO Services Australia prepares for the Falcon 6X by investing in tooling and training to be ready to provide line maintenance to the new Dassault’s flagship flying into Australia and New Zealand. ExecuJet has been sending maintenance engineers from Australia to Dassault in France and the US for type-rating and technical training on the aircraft. Other technicians have bee...

BAA Training France installs the fourth Full Flight Simulator – A320neo

BAA Training recently began installation of the fourth full flight simulator at its BAA Training France facility which is set to open at the end of September. BAA Training France, located near Paris Orly Airport, is already equipped with the B737 NG, and B747-400, while the second B737 NG simulator will soon be available for trainees. Even though the facility will be opened at the end of September...

MTU Maintenance opens new training center at Zhuhai location

MTU Maintenance announces the official opening of its training center at the service provider’s Zhuhai location in China today. The central focus of the center will be the training and education of new recruits in engine maintenance and professional training in disassembly, assembly and repair. It will have the capacity to train up to 100 participants a year. Upon completion, parti...

MTU Maintenance Canada celebrates 25 year anniversary and opens training academy

MTU Maintenance Canada is celebrating its 25th anniversary today with customers, partners, local politicians and trade union representatives as well as its over 500-strong expert workforce. In collaboration with the British Columbia Institute of Technology and funding from PacifiCan, MTU Maintenance Canada will be providing a cutting-edge training program that combines theoreti...

Aerocare makes major investment in new cabin refurbishment capabilities

Aerocare Aviation Services made a significant investment in its Chester-based MRO facilities, expanding its capabilities and workshop space to support the company’s continued growth in the business jet market and its planned diversification into commercial aviation. As an established Part 145 provider, the new investment will bolster Aerocare’s core MRO and paint shop facilities w...

Carbon Flight Academy chooses the ALSIM AL250 simulator

ALSIM announced recent acquisition of an AL250 by Valenciennes-based Carbon Flight Academy. This new acquisition marks the fifth AL250 in service in France. The AL250 simulator addresses initial phase training needs (PPL,CPL, IR/ME) and is SEP/MEP re-configurable simulator certified as an EASA FNPT II. In addition, it offers both classic and glass cockpit for each flight model at the simple f...

Upcoming events

Helitech Expo 2023

26/09/2023 - 27/09/2023
United Kingdom, London

MACE 2023 - Maintaining Altitude

11/10/2023 - 12/10/2023
Malta, St Julian

Essential news

New Praetor full-flight simulator in Europe & new location in U.S. - Embraer and FlightSafety

Embraer and FlightSafety International opened new Praetor full-flight simulator in Orlando, Florida. The simulator is already qualified by the FAA. Initial training for customers is available thi...

Top of the week

Skyborne Airline Academy invests again in ALSIM AL42 simulator

Skyborne Airline Academy has placed their second acquisition of an ALSIM AL42 simulator. The simulator will be delivered to their facility in Gloucestershire, United Kingdom. The AL42 is an exact...

Lufthansa Technik AERO Alzey expands production capacities

Lufthansa Technik AERO Alzey , has taken a substantial step towards expansion by inaugurating a new 1,500-square-meter hangar on September 15th. The new building, spanning three levels, is aimed...